Fax Status Messages

The following list is a sample of the possible failure descriptions returned by FaxStatusGet via the faxStatusMessage field. This list is not an exhaustive list. The white space for any of the messages may vary, and more statuses could be added in the future.

 ; Giving up after 3 attempts to send same page

 ; too many attempts to dial

Busy

Busy signal detected; too many attempts to dial

Calls to 500 numbers are not permitted

Calls to 555 numbers are not permitted

Calls to 800-855 numbers are not permitted

Calls to 900 toll numbers are not permitted

Calls to Alaska are not permitted

Calls to Mexico are not permitted

Calls to service numbers are not permitted

Calls to the Caribbean Islands are not permitted

Cleared

COMREC error in transmit Phase B/got DCN ; too many attempts to dial

COMREC invalid command received/no DIS or DTC; too many attempts to dial

COMREC invalid response received to EOR.; too many attempts to dial

COMREC invalid response received to EOR.; Giving up after 3 attempts to send same page

COMREC invalid response received to PPS.; Giving up after 3 attempts to send same page

COMREC invalid response received to PPS.; too many attempts to dial

COMREC invalid response received to RR.; Giving up after 3 attempts to send same page

COMREC invalid response received to RR.; too many attempts to dial

Converting File

DCS sent 3 times without response ; Giving up after 3 attempts to send same page

DIS/DTC received 3 times; DCS not recognized; Giving up after 3 attempts to send same page

DIS/DTC received 3 times; DCS not recognized; too many attempts to dial

Failed

Failed - Please Resubmit

Failed Conversion

Failed Conversion - Code 10

Failed Conversion - Code 101

Failed Conversion - Code 14

Failed Conversion - Code 15

Failed Conversion - Code 16

Failed Conversion - Code 3

Failed Conversion - Code 404

Failed Conversion - Code 5

Failed Conversion - Code 7

Failed Conversion - Code 8

Failed Conversion - Please Resubmit

Failed to properly open control V.34 channel.; Giving up after 3 attempts to send same page

Failed to properly open control V.34 channel.; too many attempts to dial

Failure to receive silence (synchronization failure).

Failure to receive silence (synchronization failure).; Giving up after 3 attempts to send same page

Failure to receive silence (synchronization failure).; too many attempts to dial

Failure to train at 2400 bps or +FMINSP value ; Giving up after 3 attempts to send same page

Failure to train remote modem at 2400 bps or minimum speed; Giving up after 3 attempts to send same page

Failure to train remote modem at 2400 bps or minimum speed; too many attempts to dial

Failure to transmit clean ECM image data.; Giving up after 3 attempts to send same page

Failure to transmit clean ECM image data.; too many attempts to dial

Fax protocol error (command repeated 3 times); Giving up after 3 attempts to send same page

Fax protocol error (command repeated 3 times); too many attempts to dial

Fax protocol error (unknown frame received); Giving up after 3 attempts to send same page

Fax protocol error (unknown frame received); too many attempts to dial

Giving up after 3 attempts to send same page

In Queue

Internal botch; bad post-page handling string "

Invalid area code

Invalid phone number

Job aborted by request

Job exceeds maximum allowed pages

Kill Time Expired

Manually cleared

No Answer

No carrier detected

No carrier detected; too many attempts to dial

No local dialtone; too many attempts to dial

No receiver protocol (T.30 T1 timeout); too many attempts to dial

No response to CTC repeated 3 times.; Giving up after 3 attempts to send same page

No response to CTC repeated 3 times.; too many attempts to dial

No response to EOP repeated 3 tries; Giving up after 3 attempts to send same page

No response to EOP repeated 3 tries; too many attempts to dial

No response to EOR repeated 3 times.; too many attempts to dial

No response to MPS repeated 3 tries; Giving up after 3 attempts to send same page

No response to MPS repeated 3 tries; too many attempts to dial

No response to PPS repeated 3 times.; Giving up after 3 attempts to send same page

No response to PPS repeated 3 times.; too many attempts to dial

No response to RR repeated 3 times.; Giving up after 3 attempts to send same page

No response to RR repeated 3 times.; too many attempts to dial

Receiver flow control exceeded timer.; Giving up after 3 attempts to send same page

Receiver flow control exceeded timer.; too many attempts to dial

REJECT

Remote fax disconnected prematurely; Giving up after 3 attempts to send same page

Remote fax disconnected prematurely; too many attempts to dial

Remote has no T.4 receiver capability

RSPREC error/got DCN (receiver abort); Giving up after 3 attempts to send same page

RSPREC error/got DCN (receiver abort); too many attempts to dial

RSPREC invalid response received; Giving up after 3 attempts to send same page

RSPREC invalid response received; too many attempts to dial

Send program terminated abnormally with exit status 0x6

Send program terminated abnormally with exit status 0xb

Stopped

Unable to configure modem for fax use

Unable to transmit page (NAK at all possible signalling rates); Giving up after 3 attempts to send same page

Unable to transmit page (NAK at all possible signalling rates); too many attempts to dial

Unknown problem; too many attempts to dial

Unspecified Transmit Phase C error; Giving up after 3 attempts to send same page

V.34/V.8 handshake incompatibility ; too many attempts to dial