View source for Fax Status Messages

The following list is a sample of the possible failure descriptions returned by FaxStatusGet via the faxStatusMessage field. This list is not an exhaustive list. The white space for any of the messages may vary, and more statuses could be added in the future.

: ; Giving up after 3 attempts to send same page  
: ; too many attempts to dial  
: Busy  
: Busy signal detected; too many attempts to dial  
: Calls to 500 numbers are not permitted  
: Calls to 555 numbers are not permitted  
: Calls to 800-855 numbers are not permitted  
: Calls to 900 toll numbers are not permitted  
: Calls to Alaska are not permitted  
: Calls to Mexico are not permitted  
: Calls to service numbers are not permitted  
: Calls to the Caribbean Islands are not permitted  
: Cleared  
: COMREC error in transmit Phase B/got DCN ; too many attempts to dial
: COMREC invalid command received/no DIS or DTC; too many attempts to dial  
: COMREC invalid response received to EOR.; too many attempts to dial  
: COMREC invalid response received to EOR.; Giving up after 3 attempts to send same page   
: COMREC invalid response received to PPS.; Giving up after 3 attempts to send same page  
: COMREC invalid response received to PPS.; too many attempts to dial  
: COMREC invalid response received to RR.; Giving up after 3 attempts to send same page  
: COMREC invalid response received to RR.; too many attempts to dial  
: Converting File  
: DCS sent 3 times without response ; Giving up after 3 attempts to send same page   
: DIS/DTC received 3 times; DCS not recognized; Giving up after 3 attempts to send same page  
: DIS/DTC received 3 times; DCS not recognized; too many attempts to dial  
: Failed  
: Failed - Please Resubmit  
: Failed Conversion  
: Failed Conversion - Code 10  
: Failed Conversion - Code 101  
: Failed Conversion - Code 14  
: Failed Conversion - Code 15  
: Failed Conversion - Code 16  
: Failed Conversion - Code 3  
: Failed Conversion - Code 404  
: Failed Conversion - Code 5  
: Failed Conversion - Code 7  
: Failed Conversion - Code 8  
: Failed Conversion - Please Resubmit  
: Failed to properly open control V.34 channel.; Giving up after 3 attempts to send same page  
: Failed to properly open control V.34 channel.; too many attempts to dial  
: Failure to receive silence (synchronization failure).  
: Failure to receive silence (synchronization failure).; Giving up after 3 attempts to send same page  
: Failure to receive silence (synchronization failure).; too many attempts to dial  
: Failure to train at 2400 bps or +FMINSP value ; Giving up after 3 attempts to send same page  
: Failure to train remote modem at 2400 bps or minimum speed; Giving up after 3 attempts to send same page  
: Failure to train remote modem at 2400 bps or minimum speed; too many attempts to dial   
: Failure to transmit clean ECM image data.; Giving up after 3 attempts to send same page  
: Failure to transmit clean ECM image data.; too many attempts to dial  
: Fax protocol error (command repeated 3 times); Giving up after 3 attempts to send same page  
: Fax protocol error (command repeated 3 times); too many attempts to dial
: Fax protocol error (unknown frame received); Giving up after 3 attempts to send same page  
: Fax protocol error (unknown frame received); too many attempts to dial  
: Giving up after 3 attempts to send same page  
: In Queue  
: Internal botch; bad post-page handling string "  
: Invalid area code  
: Invalid phone number  
: Job aborted by request  
: Job exceeds maximum allowed pages  
: Kill Time Expired  
: Manually cleared  
: No Answer  
: No carrier detected
: No carrier detected; too many attempts to dial  
: No local dialtone; too many attempts to dial 
: No receiver protocol (T.30 T1 timeout); too many attempts to dial   
: No response to CTC repeated 3 times.; Giving up after 3 attempts to send same page  
: No response to CTC repeated 3 times.; too many attempts to dial  
: No response to EOP repeated 3 tries; Giving up after 3 attempts to send same page  
: No response to EOP repeated 3 tries; too many attempts to dial  
: No response to EOR repeated 3 times.; too many attempts to dial   
: No response to MPS repeated 3 tries; Giving up after 3 attempts to send same page  
: No response to MPS repeated 3 tries; too many attempts to dial  
: No response to PPS repeated 3 times.; Giving up after 3 attempts to send same page  
: No response to PPS repeated 3 times.; too many attempts to dial  
: No response to RR repeated 3 times.; Giving up after 3 attempts to send same page  
: No response to RR repeated 3 times.; too many attempts to dial   
: Receiver flow control exceeded timer.; Giving up after 3 attempts to send same page  
: Receiver flow control exceeded timer.; too many attempts to dial  
: REJECT   
: Remote fax disconnected prematurely; Giving up after 3 attempts to send same page  
: Remote fax disconnected prematurely; too many attempts to dial  
: Remote has no T.4 receiver capability  
: RSPREC error/got DCN (receiver abort); Giving up after 3 attempts to send same page  
: RSPREC error/got DCN (receiver abort); too many attempts to dial   
: RSPREC invalid response received; Giving up after 3 attempts to send same page  
: RSPREC invalid response received; too many attempts to dial  
: Send program terminated abnormally with exit status 0x6  
: Send program terminated abnormally with exit status 0xb  
: Stopped  
: Unable to configure modem for fax use  
: Unable to transmit page (NAK at all possible signalling rates); Giving up after 3 attempts to send same page  
: Unable to transmit page (NAK at all possible signalling rates); too many attempts to dial   
: Unknown problem; too many attempts to dial  
: Unspecified Transmit Phase C error; Giving up after 3 attempts to send same page  
: V.34/V.8 handshake incompatibility ; too many attempts to dial